How it works

From install to live map in a day

Pick a device, fund tracking from your Draychain credit balance, and every move shows up on the map with its container, chassis and terminal times.

Getting started

Four steps

1
Connect your trucks
Install a hardwired or OBD tracker, or have drivers sign in to the Draygo driver app. Each device is linked to a truck unit number.
2
Fund with Draychain credits
Tracking is charged from your Draychain credit balance. Top up once on draychain.com and every Draygo service draws from it.
3
Dispatch and track
Attach a container and chassis to each move. The truck appears on the live map, and gate times at each terminal are recorded automatically.
4
Share and settle
Send customers a live ETA link, then use trip history and turn times to back up billing and detention claims.

Devices

Mix devices in one fleet. Everything lands on the same map and in the same history.

Every 10 seconds

Installed behind the dash and powered by the truck. Keeps reporting whoever is driving, and survives a dead phone.

Every 10 seconds

Plugs into the diagnostic port in a minute. Also reports ignition, so idle time at terminals is accurate.

Every 30 seconds

No hardware at all. Drivers sign in on their phone at the start of a shift, which suits owner-operators.

A tracked move

Step 1
Pickup
Driver attaches container and chassis numbers to the move in the app, or dispatch does it in the console.
Step 2
Gate-out
Leaving the terminal geofence logs the gate-out time and starts the live ETA.
Step 3
On the road
Positions stream every 10 seconds. Off-route, speeding and long-idle alerts run in the background.
Step 4
Delivery
Arriving at the warehouse geofence closes the move and expires any shared ETA link.

Start with the driver app today, add hardwired trackers when you are ready.